Bright, Efficient Lighting for the Rio Grande Valley
Lighting Installation, Upgrades & LED Retrofits
From recessed cans and under-cabinet task lights to pendants, chandeliers, security floods, and landscape lighting, Treviño Repairs installs lighting that looks great and works reliably. We verify box support and wiring, match LED-rated dimmers to your fixtures for flicker-free control, and set the right color temperature and lumen output for each space. Outdoors, we use WR fixtures with proper GFCI/AFCI protection and can add motion or dusk-to-dawn sensors. On every job we protect the work area, make clean, code-compliant connections, test and aim, and haul away the old fixtures—leaving a neat, polished finish for your home or business.
Design, Install & Retrofit — RGV Wide
Services for Lighting Installation & Upgrades
Treviño Repairs plans and installs lighting that’s bright, efficient, and code-compliant. We verify box support and fixture weight ratings, choose the right beam spread and color temperature (warm 2700–3000K for living areas, neutral 3500–4000K for task zones), and match LED-rated dimmers to your fixtures for flicker-free control. Outdoors we use weather-rated (WR) fixtures with proper GFCI/AFCI protection, and for remodels we offer low-profile, canless downlights to avoid ceiling damage. Expect clean workmanship, neat aiming/leveling, and a polished finish for your Rio Grande Valley home or business.
We install & replace — Interior:
- Recessed & canless LED downlights (IC/air-tight where required)
- Pendants, chandeliers, semi-flush/flush mounts, sconces
- Under-cabinet, toe-kick, and cove/accent lighting
- Vanity & shower-rated fixtures, mirror lights
Exterior & security:
- Wall packs, entry and garage lights, soffit cans
- Motion and dusk-to-dawn floods; WR fixtures with in-use covers
- Path/step/stair lighting and address lights
Landscape & low-voltage:
- LED path, spot, and wash lights; transformer sizing and tapping
- Timer/photo controls and line-voltage to low-voltage transitions
Controls & dimming (wiring/installation):
- LED-rated dimmers, 3-way/4-way corrections, vacancy/occupancy sensors
- Smart-ready switches/dimmers (wiring only; app setup by owner/provider)
Electrical & code items (as applicable):
- Proper box support/brace kits for heavy fixtures
- GFCI/AFCI protection where required; bonding/ground checks
- Ladder/high-ceiling service, swag kits, canopy/chain adjustments
Maintenance & troubleshooting:
- Flicker, humming, or ghosting fixes (driver/dimmer compatibility)
- Transformer and photocell replacements; aiming and re-leveling
- Fixture cleaning, re-lamp to LED, and lumen/color matching
Color Temp, Lumens, CRI & Dimmers—The Basics
Great lighting starts with the right specs for the room. Use color temperature to set the mood: 2700–3000K feels warm and relaxing (living rooms/bedrooms), while 3500–4000K is a clean neutral for kitchens, offices, and task areas. Think lumens, not watts—lumens measure brightness; pick higher lumens for big rooms or high ceilings. Look for CRI 90+ when true color matters (kitchens, baths, closets), and choose the beam spread that fits the job (wide for general light, narrow for accents). For recessed layouts, a simple rule of thumb is about 4–6 ft spacing on 8–9 ft ceilings, adjusted for how bright you want the space. Match your controls to the fixtures: use LED-rated dimmers and the right dimming type (ELV/reverse-phase vs. triac/forward-phase) to prevent flicker and humming. Finally, pick fixtures with the correct ratings—IC/air-tight where insulation touches, damp/wet-rated for showers and outdoors—and Treviño Repairs will handle the code-compliant wiring and installation for your Rio Grande Valley property.
Know the Warning Signs in the Rio Grande Valley
When to Replace or Upgrade Lighting
If your lights flicker or buzz on dimmers, look uneven or too dim for tasks, burn out early, or show mismatched color temperatures from room to room, it’s time for an upgrade. Other red flags include hot or discolored fixtures, sagging/heavy chandeliers on weak boxes, noisy fluorescent ballasts, failing transformers, corroded outdoor fixtures, or fixtures not rated for damp/wet areas—plus rising energy bills from old incandescent/halogen lamps. Treviño Repairs can verify box support and wiring, match LED-rated dimmers to your fixtures, swap aging ballasts for LED retrofits, correct spacing/aim and color temperature/CRI, and install weather-rated fixtures with proper GFCI/AFCI protection—delivering bright, efficient, code-compliant lighting for your RGV home or business.
What to Expect with Treviño Repairs
Our CO & Smoke Detector Service Process
Assess & Plan. Confirm fixture locations, support/weight ratings, circuit capacity, and preferred color temperature/brightness for each space.
Protect & Prep. Lay drop cloths, set ladders/scaffolds, shut off power safely, and stage hardware so the workspace stays clean.
Remove & Inspect. Take down old fixtures, check box integrity and grounding, verify wiring, and correct any heat damage or loose connections.
Mount & Wire. Install proper support (brace kits if needed), make code-compliant terminations, and set weather-rated gear outdoors with in-use covers where required.
Controls & Dimming. Install LED-rated dimmers or sensors, fix 3-way/4-way issues, and match dimming type (ELV/triac) to your fixtures to prevent flicker.
Aim, Level & Test. Level chandeliers/pendants, aim floods/landscape lights, verify lumen output and color temperature, and test GFCI/AFCI where applicable.
Clean Up & Walkthrough. Tidy the area, haul away old fixtures, review operation and care, and note any recommendations for your Rio Grande Valley home or business.
Real Stories. Real Results.
What Our Customers Are Saying
Lighting Questions, Answered
Straightforward answers before you book—symptoms, costs, fixes.
How do I pick the right color temperature?
Use 2700–3000K for warm, relaxing spaces (living/bedrooms) and 3500–4000K for clean, task-friendly light (kitchens, offices). We’ll match rooms so your RGV home looks consistent.
Why do my LEDs flicker or buzz on a dimmer?
Usually a dimmer/driver mismatch. We install LED-rated dimmers and the correct dimming type (ELV/reverse-phase or triac/forward-phase) to eliminate flicker and humming.
Can you handle heavy fixtures and high ceilings?
Yes. We verify box/brace ratings for chandeliers and fans, provide proper support, and bring the ladders/scaffolds needed for tall or vaulted ceilings.
Do I need special fixtures outdoors or in showers?
Use damp/wet-rated fixtures and WR devices with in-use covers outdoors, plus GFCI/AFCI where required. In showers/steam areas, choose fixtures specifically rated for the environment.
Are LED retrofits worth it?
Typically yes—lower energy use, less heat, longer life, and better control. We match lumens (brightness), CRI, and beam spread so your retrofit is as bright (or brighter) than what you have, without changing your room’s look.
